Abstract
All-solid-state Li-S batteries were fabricated with lithium silicide anodes (Li₄.₄Si), sulfide-based glass electrolyte (Li₂S-P₂S₅), and a sulfur composite cathode. The sulfur based composite cathode was prepared using two methods; (Case 1) mortar-mixing and (Case 2) planetary ball milling at a rotation speed of 370 rev/min for 15 min. SEM analysis..... More

Abstract
Hybrid organic/inorganic composites have recently been investigated in the thermoelectric field in an effort to interdependently manipulate the charge carriers, which are interconnected with electrical and thermal transport. The decoupling of a charge carrier’s roles in the hybrid structures can result in enhanced thermoelectric performance, by only exploiting the high..... More

Abstract
Despite of many attractive properties of TiN, the current concern about the TiN focuses on its low fracture toughness below the ductile-brittle transition temperature. To improve its mechanical properties, the approach generally utilized has been the addition of a second phase to form composites and to make nanostructured materials. In..... More

Abstract
A composite having 60 vol% of TiC particles was successfully fabricated by the infiltration of molten SKD11 tool steel into a TiC preform. The density of this composite was achieved to be 25% lighter than conventional steels. The penetration of the liquid metal reached geometrically complex regions without any interfacial..... More

Abstract
Despite of the many attractive properties of TiO₂, its low fracture toughness limits many industrial applications. To improve its fracture toughness, the approach commonly utilized has been the addition of a second phase, to form composites, and to make nanostructured composites. In this regard, highly dense nanostructured TiO₂ and TiO₂-graphene..... More

Abstract
The aim of this study is to establish an optimized hot-press sintering condition for aluminum matrix composites (AMCs) by analyzing their sintered microstructure and mechanical properties. The fabricated AMCs in this study consisted of a blend of commercial Ecka Alumix 431 powder, and Al-Si/SiC_p powder manufactured by gas atomizer (Al-Si/SiC_p)...... More

Abstract
Fe-TiB₂ powder was synthesized in-situ by the planetary ball milling and subsequent heat-treatment of an iron boride (FeB) and titanium hydride (TiH₂) powder mixture. Mechanical activation of the (FeB+TiH₂) powder mixtures was observed after a milling time of 3 hours at 700 rpm of rotation speed, but activation was not..... More

Abstract
The low mechanical properties of SiC limit its wide application despite many attractive properties. To improve the mechanical properties, a second phase has been generally added to make a nanostructured composite. In this respect, graphene was evaluated as the reinforcing agent of SiC. SiC-graphene composites were sintered within 2 min..... More

Abstract
CoTi and ZrO₂ nanopowders were mechanochemically synthesized from CoTiO₃ and Zr powders according to the reaction (2CoTiO₃ + 3Zr → 2CoTi + 3ZrO₂). The milled powders were then consolidated by pulsed current-activated sintering within two minutes under an applied pressure of 80MPa. The average hardness and fracture toughness of the..... More

Abstract
In this paper, we demonstrate that the microstructure and mechanical properties in the Ti₄₀Zr₁₀Cu₃₆Pd₁₄ alloy can be tailored by controlling the cooling rate during solidification. A lower cooling rate increases the volume fraction of crystalline phase such as B2 but decreases the free volume of the glassy matrix. The increase..... More

Composite Materials

Powder Metallurgy

Abstract
TiC-Co or TiC-Ni hard materials have been used for cutting tools. However, the high cost and the low hardness of Ni or Co, and the low corrosion resistance of the TiC-Ni and TiC-Co cermets have generated interest in recent years in using them as alternative binder phases. In this study,..... More